All Categories
N38300 Programmable DC Power Supply(5kW~180kW)

Home>Products>DC Power Supplies

N38300 series high power high voltage programmable dc power supply
N38300 front panel
N38300 configuration
N38300 rear panel
N38300 Programmable DC Power Supply(5kW~180kW)
N38300 Programmable DC Power Supply(5kW~180kW)
N38300 Programmable DC Power Supply(5kW~180kW)
N38300 Programmable DC Power Supply(5kW~180kW)

N38300 Programmable DC Power Supply(5kW~180kW)


N38300 series is a wide range, high power density, programmable high power DC power supply. N38300 standalone 19-inch 3U chassis is up to 18kW. Power efficiency is as high as 93%. Power range is up to 180kW. Current range is up to 5100A and voltage range is up to 2250V. N38300 series DC power supply has comprehensive functions and supports multiple control methods, making it an ideal choice for laboratory applications and automated test systems.

Share to:
Main Features

●Voltage up to 2250V, current up to 5100A, power up to 180kW

●Supporting master/slave parallel, extended power up to 1.8MW

●Voltage accuracy 0.05%F.S., current accuracy 0.1%F.S.

●Voltage and current sampling rate 500kHz, resolution 16 bits

●Power factor 0.99, efficiency up to 93%

●LAN port and RS232 interface as standard, GPIB, CAN, RS485 and USB as optional

●CC&CV priority function

●CC, CV and CP mode

●Standard 19-inch 3U chassis

●Editable rise and fall slew rate for voltage and current

●Internal resistance simulation, SEQ function, voltage RAMP function

●Multiple protections: OCP, OVP, LVP, OTP, OPP

●Equipped with LCD screen, numeric buttons and knob to support local operation

●Equipped with high-voltage isolation digital & analog, and monitoring interfaces

Application Fields

●New energy fields, such as Li-on battery, photovoltaic, hydrogen fuel, energy storage BMS, etc.

●Testing and powering of high power electronic component

●Laboratory, production line ATE automatic test system

●Power electronics fields, such as high power DC-DC converter, DC-AC inverter, etc.

●Testing and powering of aerospace electronics

●Industrial automation fields, such as controllers, drives, servers, robots, etc.

Functions & Advantages

Wide range for saving purchase cost

N38300 series' maximum power is not the result of Max. voltage multiplied by Max. current. Let’s take model N38306-300-75 for example. The Max. power is 6kW while Max. voltage 300V and Max. current 75A. Compared with traditional power supply, this feature offers N38300 wider application range, which significantly reduces the purchase cost and space occupation.

high power high voltage output

CC&CV priority function

N38300 has the function of selecting priority of voltage-control loop or current-control loop, which enables N38300 to adopt the optimal test mode for different DUTs, and thus protect the DUT.

As shown in figure one, when the DUT requires reducing voltage overshoot during test, such as supplying power to a low-voltage processor or FPGA core, voltage priority mode should be selected to obtain fast and smooth rise voltage.

As shown in figure two, when the DUT requires reducing current overshoot during test, or when the DUT is with low impedance, such as battery charging scenario, current priority mode should be selected to obtain fast and smooth rise current.

CC&CV priority function

Internal resistance simulation

N38300 series allows settings of voltage and internal resistance value. According to the corresponding output current, the output voltage is decreased with the set resistance. In this case, the internal resistance of secondary battery, fuel cell and supercapacitor can be simply simulated.

internal resistance simulation

Master/slave design, convenient for power expansion

N38300 can be used independently or in master/slave parallel operation. It has built-in master/slave mode, and the Max. power can be expanded to 1.8MW. It adopts a unique current sharing design to ensure each module shares the load equally and ensure the consistency of product use.

master/slave design

Database
Inquiry

Hot categories