NXI-3100 Series Programmable DC Power Supply Card
NXI-3100 series is a programmable DC power supply card with high reliability,high power density,high accuracy.It adoptssingle card&single slot&single channel modular design based on NXI architecture. NXI-3100 supports independent singlecard /integrated control, supports CC, CV and SEQ modes, CC&CV priority selection function,widely used in integratedtest systems, large-scale production line testing and other test scenarios.
Voltage Range:0-30V,Current Range:0-2A
Support CC,CV mode
Voltage Accuracy: ≤0.05%+15mV
Current Accuracy: ≤0.15%+3mA
Support CC&CV priority selection function
Support SEQ function,20 steps for each file,total 10 files
Support OVP/OCP/OPP/OTP protection
4HP width for single card,output power up to 60W
220V AC input,support LAN port communication control
Support integrated with NXI-F1080,N8000S measurement&control chassis
For integrated system
Functions & Advantages
NXI-3100 series supports SEQ mode,and it can be edited inup to 200 steps,users can set output voltage, output current,and single step dwell time.
CC&CV Priority Function
NXI-3100 series supports CC&CV priority function,users canchoose the optimal working mode for testing according to the characteristics of DUT.
As shown in Figure 1, when the DUT needs to avoid voltage overshoot during testing,the voltage priority mode should be used to obtain a fast and smooth rise voltage.
As shown in Figure 2, when the DUT needs to avoid the current overshoot, or the DUT is low impedance, the current priority mode should be used to obtain a fast and smooth rising current.